Place of Origin : Beijing, China
Brand Name : XD BATTERY
Certification : MSDS,UN38.3, UL1642, CE,IEC
MOQ : 100pcs
Price : Negotiable
Delivery Time : 2~4weeks for samples; 4~6weeks for mass production
Payment Terms : L/C; TT
Supply Ability : 450Mwh/year
Material : Lifepo4
Nominal Voltage : 48~51V
Nominal Capacity : 80A
Applicaiton : Electric Tricycle
Weight : 43.5±1kg
Standard : MSDS
The electrical parameters of the XD 48v 200ah lithium ion battery are compatible in all respects with those of an AGM lead battery of 12V. In the vast majority of cases, the charging system can be kept the same and no additional accessories are required to perform the replacement.
The products XD are light, compact, efficient and can be used for all types of uses and applications. XD are designed to drop-in replacement of old generation batteries (Lead VRLA, AGM or OPZ batteries) in 12V, that are low performance and harmful to the environment (use of heavy metals and acid electrolytes).
1. General Information
This specification defines the performance of rechargeable LiFePO4 battery pack TB4880F-T106A manufactured by TOPBAND Lithium battery,describe the type, performance, technical characteristics, warning and caution of the battery pack.
2. Specification(@Battery initial Temp25±5℃)
|2.5||Limited charge voltage||54.7±0.2V|
|2.6||Floating charge voltage||51.7±0.2V|
|2.7||Standard charge current||50A|
|2.8||Maximum charge current||50A|
|2.9||Maximum discharge current||50A|
|2.10||Pulse discharge current||100A/Continuous for 8s|
|2.11||Discharge cut-off voltage||30.0~37.5V|
|Dimension||Length: 570±2 mm|
|Width: 329±2 mm|
|Height: 215±2 mm|
|Recommended operating temperature:15℃～35℃|
|2.15||Self-discharge rate||Residual capacity:≤3%/month;≤15%/year|
|Reversible capacity: ≤1.5%/month;≤8%/year|
|2.16||Storage Temperature & Humidity Range||Less than 1 month:-20℃～45℃,45%RH～75％RH|
|Less than 3 months:-10℃～35℃,45%RH～75％RH|
Recommended storage environment:
Long time storage:
If the battery need be stored for a long time, the voltage should be 49.5V (50%SOC), and stored in the condition as storage proposal. It need at least one charge & discharge cycle every six months.
3. Test Conditions
3.1 Standard Test Conditions
3.1.1 Unless otherwise specified, all performance tests is required conducted at temperature 25℃±2℃, Humidity less than 45%~75%RH.
3.1.3 Unless otherwise specified, the tested product is required unused within two month after outgoing.
3.2 Standard Charge Mode
"Standard Charge" means at 25±2℃ charge to limit voltage with 0.62C constant current, then charge with constant voltage until current less than 0.02C.
3.3 Quick Charge Mode
"Quick Charge" means at 25±2℃ charge to limit voltage with 0.62C constant current, then charge with constant voltage until current less than 0.02C.
3.4 Standard Discharge Mode
"Standard Discharge" means at 25±2℃ discharge to the cut-off voltage with 0.62C current.
3.5 Quick Discharge Mode
"Quick Discharge" means discharge to the cut-off voltage with 0.62C current.
4. Product Performance
|4.1||Rated Capacity||80Ah||Rest for 1 hour after fully charged, then discharge with 0.5C current until the battery reaches the discharge cutoff voltage. Repeat above process for three times, if the discharge time is not less than 120 minutes, you can stop and define the Discharging current*time value (Ah) as battery capacity.|
|4.3||Internal resistance||≤20mΩ||50% battery SOC state frequency of 1 KHZ ac resistance tester|
|≥2000cycle||Discharge with the current of 0.5C until it can’t discharge, and then rest it for 1h. Charge the battery following CC(0.5C)/CV(54.7V) mode to full capacity, and then rest it for 1h. Repeat above process until full charged capacity is no more than 80% of normal value. Accumulated times is defined as cycle life.|
|-20℃||≥70%||At 25±5℃ discharge the battery with the current of 0.5C to the cut-off voltage and record charge capacity. Store the battery at various temperatures for 2h and discharge the battery with 0.5C to the cut-off voltage.|
|4.7||Charge Retention ability|| |
|Charge the battery to full capacity and store it for 28days, and then discharge it with 0.5C to the cut-off voltage.|
5. Protective circuit specification
The batteries are supplied with a LiFePO4 Battery Management System (BMS)that can monitor and optimized each single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.
|5.1||Over charge||Over-charge protection for each cell||3.9±0.05V|
|Over-charge release for each cell||3.6±0.05V|
|Over-charge release method||Under the release voltage|
|5.2||Over discharge||Over-discharge protection for each cell||2.0±0.1V|
|Over-discharge release for each cell||2.7±0.1V|
|Over-discharge release method||Charging recovery|
|5.3||Over current||Discharge over current protection||160±10A,delay300±100ms|
|Over current release method||release after cutoff the load.|
|5.4||Short||Available||Release after charge|
|5.5||Battery temperature||Charge over temperature||Protection @85±5℃|
|Discharge over temperature||Protection @85±5℃|
|5.6||Static power||Since the power consumption≤20mA; After discharge protection≤250uA|
* Based on the character of cell, proper environment for transportation of LiFePO4 battery pack need to be created to protect the battery.
* Battery should be stayed in the warehouse 15℃～35℃ where it’s dry, clean, shade, and well-ventilated.
* The battery should be stored in 50% SOC during transportation.
* The battery need to be charged every 6 months if out of use
* Keep the battery against droppoing, turning over and serious stacking during lodaing.
7. Warning & Tips
Please read and follow the specification and caution remarks on battery surface before use the battery. Improper use may cause heat, fire, rupture, damage or capacity deterioration of the battery. SHENZHEN TOPBAND NEW ENERGY CO.,LTD. Describes is not responsible for any accidents caused by the usage without following our specification.
8. Battery operation instruction
Charge and discharge
1. Charging current:Do not surpass the largest charging current that specification stipulated.
2 .Charging voltage:Do not surpass the highest limited voltage that specification stipulated.
3 .Charging temperature:within temperature scope that specification stipulated.
4. Charge with constant current, then with the constant voltage, no reverse charge, which is dangerous
5. Special note: Short time doesn't affect the use of the battery overcharge too, but for a long period of time over discharge or over charge can affect the function of the battery failure, or the battery can't use permanent, appear serious safety hazards, need long time floating please use the recommended floating model specification. Battery when not in use for a long time, because of its own self-discharge characteristics can also cause discharge, to prevent the occurrence of a discharge, battery should maintain a certain capacity, maintain the voltage at 50% state of SOC.
9. Other Chemical Reaction
Because batteries utilize a chemical reaction, battery performance will deteriorate over time even if stored for a long period of time without being used. In addition, if the various usage conditions such as charge, discharge, ambient temperature, etc. are not maintained within the specified ranges, the life expectancy of the battery may be shortened or the device in which the battery is used may be damaged by electrolyte leakage. If the discharge time is much shorter than the normal after full charged, even battery is charged correctly, and this may indicate it is time to change the battery.
10. Dimensional Drawing (Unit: mm)
lifepo4 battery pack,
lithium iron phosphate cells,
lifepo4 prismatic cells
Electric Tricycle 48v Lifepo4 Battery Prismatic Cells 48V 80A Quick Charge Mode Images